Avvertenze prodotti
IT IS IMPORTANT THAT YOU TEST FIT YOUR PRODUCT/S BEFORE FINAL FITTING TO ENSURE YOU UNDERSTAND THE CORRECT ORIENTATION AND PLACEMENT BEFORE REMOVING ANY PROTECTIVE FILMS OR
BACKING TAPE.
WE ARE NOT ABLE TO REFUND ANY ITEMS WHICH HAVE EITHER BEEN USED OR HAD THE ABOVE-MENTIONED FILM/BACKING
TAPE REMOVED.
SHOULD YOU HAVE ANY UNCERTAINTY ON THE PROCESS OF FITTING YOUR PRODUCT/S, WE'D RECOMMEND VISITING OUR YOUTUBE CHANNEL FOR THE RELEVANT INSTALLATION VIDEO/S.
TIPS:
- FOR PRODUCTS THAT HAVE A LEFT & RIGHT, PLEASE BE AWARE YOU NEED TO TEST FIT THEM TO ENSURE YOU HAVE THE RIGHT SIDE BEFORE STICKING
- FOR STICKERS AND PRODUCTS THAT AFFIX TO YOUR VEHICLE WITH 3M TAPE, YOU MUST ENSURE THAT THE SURFACE IS CLEAN AND FREE FROM CONTAMINANTS BEFORE FITTING. THIS CAN BE
- ACHIEVED BY CLEANING THE AREA WITH A SOLVENT SUCH AS AN ALCOHOL-BASED PRODUCT, FOLLOWED BY USING THE PROVIDED ADHESION PROMOTER. IN COLDER TEMPERATURES.
IT IS ALSO RECOMMENDED TO HEAT BOTH THE AREA YOU ARE AFFIXING THE PRODUCT TO, AS WELL AS THE PRODUCT ITSELF TO ENSURE STRONG ADHESION. THIS CAN BE DONE THROUGH USE OF A HAIRDRYER OR HEAT GUN.
-THE BACKING OF 3M TAPE CAN SOMETIMES BE DIFFICULT TO REMOVE.
IF YOU HAVE ANY TROUBLE REMOVING THE BACKING BY HAND, WE'D RECOMMEND ENSURING THAT YOU FIRST PRESS DOWN ON THE TAPE, BEFORE REMOVING THE BACKING WITH A TOOL SUCH AS A PAIR OF TWEEZERS TO MAKE THIS PROCESS EASIER.
ADHESION WIPES:
DO NOT USE ON SURFACES YOU ARE NOT STICKING 3M TAPE ON, THIS PRODUCT APPLYS A LAYER OF GLUE TO ENSURE TOTAL ADHESION.
THESE ARE ADHESION WIPES NOT CLEANING PRODUCTS.
